plumber rates per hour

plumber rates per hour

Hiring a good plumber is not only cost-efficient in many cases, but they can often work faster and more efficiently than one would expect.

Note: This post may contain affiliate links. This means that at no cost to you, we may receive a small commission for made purchases.

Even without knowing “how much does a plumber cost?”, most people understand it’s not the cheapest service, but they also realize not hiring a plumber could cost a whole lot more. According to Home Advisor, the average cost to hire a plumber in the United States is $309. This includes big and small jobs with various levels of plumbing expertise

So before you reserve hiring a plumber for when turtles invade the sewer pipes or take the princess to another castle, let’s have a look at the breakdown of national price averages, what affects them, and when you might want to hire a professional over doing the job yourself.

How Much do Plumbers Charge per Hour?

There are various ways professional plumbers can charge their customers. Most plumbers will either charge by the hour or by the job. Sometimes, there may be a flat rate that involves the first hour of work and basic parts.

These base fees are sometimes all you will be charged, but they do not account for additional time or unexpected complications (ex: having to rip up a toilet to remove an obstruction). Regardless of whether or not a basic service fee is quoted, time is money.

Plumber Cost Per Hour

Apprentice or Handyman

A plumber apprentice is at the start of their plumbing career. Since they don’t yet have the experience as a journeyman or master plumber, they can charge less but since they don’t require a license, there is slight risk involved.

Apprentices and general handymen typically charge somewhere between $20 and $40 per hour. For basic tasks like unclogging a drain, stopping a water leak, or replacing your water heater’s anode rod, any apprentice or handyman can take care of this if you don’t have the means to do so.

Journeyman Plumber

A plumber who has a journeyman license generally has more knowledge and experience than an apprentice. Most professional plumbers fall into this category.

Expect to pay between $45 and $90 per hour for a journeyman plumber. These plumbers can handle all but the most complex plumbing jobs including installing a new fixture, troubleshooting a tankless water heater, or putting in a new toilet or automatic shut off valve.

Master Plumber

Master plumbers typically have the highest level of education, knowledge, and experience so they can command the highest hourly rates. They are often in an owner or supervisory role.

Master plumbers will cost somewhere between $70 to $130 per hour as a labor rate. They’re usually worth it for large projects where complex code requirements must be followed or when creative solutions are needed.

Common Flat Rate Fees

Many tasks are so common the plumber estimates parts and labor ahead of time, allowing them to set a flat fee. These jobs typically range from $100 to $400 depending on the complexity.

These are generally quick repairs, such as unclogging a toilet or drain, fixing a faucet, or simple toilet repairs. In a few cases, the flat rate only applies to the service call and any labor is calculated separately.

Note: Make sure you’re not covered under warranty for the product before scheduling service.

Factors that Affect Cost

There are quite a few things that can affect a plumber’s fees.

  1. Factors that are beyond the plumber’s control can often affect final costs. Things such as outdated piping that needs replaced during an installation due to its condition or having to connect an old pipe with more modern materials such as PEX. These situations can increase both parts and labor costs quickly.
  2. Another factor that can have an impact on the hourly rates is how much the plumber must pay in union dues. Higher dues equate to a higher work fee. As a result, up to 25 percent of the hourly cost may actually be covering the union’s fees if your plumber is a member.
  3. A third factor is the trip or call-out fee. Due to travel, there might be a base fee of $50 to $300 to cover the cost of gas, vehicle maintenance, and equipment. This amount is usually included in a flat rate, but may be an additional fee when the plumber must travel extra distances.
  4. Finally, emergency calls where you need the plumber to come after hours or on weekends can result in much higher fees. Generally, an emergency rate will range from $100 to $300 for the flat/trip fee, with each additional hour costing approximately $70 to $400 for regular jobs.

Individual Job Costs and DIY Feasibility

Getting the job done right doesn’t always mean having to get a professional plumber in. The following charts break down most common plumbing tasks, their average costs, and whether or not it’s something a DIYer should be able to tackle. As always, when in doubt, it’s best to consult a pro.

Common Repair Rates

Job (Repair) Average Cost DIY Difficulty
Clogged Drain $125 to $300 Easy
Drain Line $250 to $1,000 Varies
Gas Lines $250 to $750 Varies
Leaks $150 to $700 Easy
Septic Tank $600 to $2,500 Hard
Septic Tank Cleaning $300 to $500 Easy
Sewer Camera Inspection $300 to $500 Easy-Med
Sewer Line Cleaning $175 to $450 Hard
Sewer Main Line $1,200 to $4,000 Do Not Attempt!
Sump Pump $300 to $700 Easy
Toilet $150 to $300 Easy
Water Heater $200 to $900 Med-Hard
Water Main $400 to $2,000 Hard
Well Pump $350 to $1,350 Hard

Common Install Rates

Job (Install) Average Cost DIY Difficulty
Bathtub $800 to $3,000 Hard
Faucet $150 to $300 Easy
Garbage Disposal $500 to $800 Easy
Repipe House $2,500 to $15,000 Hard
Sewer Main $1,400 to $4,000 Do Not Attempt!
Shower $850 to $3,500 Hard
Sump Pump $650 to $1,600 Hard
Toilet $200 to $750 Easy
Water Heater $750 to $3,000 Varies (May void warranty)
Water Main $800 to $2,200 Hard
Water Purification System $850 to $2,800 Hard

Potential Post-Plumber Expenses

A plumber’s job is to fix your plumbing. As such, they might uncover (or leave behind) damage that they’re not willing or able to fix. This may involve water damage, landscaping, or repairing holes.

The following are some of the most common repairs you might encounter after the plumber’s job is done:

Repair Job Average Cost DIY Difficulty
Carpet Installation $200 to $2,500 Easy
Drywall Repair $300 to $800 Easy
Electrician Rates $150 to $500 Varies
Landscaping $1,400 to $5,300 Varies
Sod Installation $1,000 to $2,600 Easy
Water Restoration $1,000 to $4,000 Hard

Photo of author

BY M. Kogan

Hello, I am Marcio. I am an architect and designer, alma mater is Mackenzie. Retired in theory, but an architect never retires completely. Along with architectural projects, I am a filmmaker and have completed some short documentaries. Filmmaking and design are my passions. In HomeQN I write about home decoration and foundations. The goal is to teach homeowners to DYI as much as possible, and when this is not possible, enable them through knowledge, to evaluate service quotations and choose the best service technicians.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.