how to tell if your furnace is gas or electric

how to tell if your furnace is gas or electric

Note: This post may contain affiliate links. This means that at no cost to you, we may receive a small commission for made purchases.

How would you know whether your home has forced air heating? If you don’t know, then you might want to read this article.

Forced air heating is a type of heat pump system that uses electricity to move warm air through ducts into rooms.

This type of heating is commonly found in homes built before 1978.

You can easily identify forced air heating systems by looking at the vents in the walls. These vents should be located near the ceiling.

They usually look like round holes in the wall. The vents are connected to an exhaust fan, which forces warm air out of the house and back into the outside environment.

If you have any doubts about what kind of heating system you have, it is best to hire a professional to inspect your home for you.

A qualified HVAC technician will be able to determine the exact type of heating system you have.

If you live in an older home with forced-air heating, there is a good chance that your home was originally designed to use natural gas as its primary source of heat.

You may not even realize that you have a natural gas furnace until you need to replace it.

However, many newer homes use electric heating instead of natural gas. In these cases, you will find that the vents in the walls are actually electrical outlets.

The most common types of forced air heating (see also ‘Which Is The Better Option For Your Home: Radiant Heat Or Forced Air?‘)  include:

• Forced Air Heating System – This is the most popular form of forced air heating. It consists of a central unit that heats up the air inside the ductwork.

Then, the heated air is sent throughout the house via small tubes called “ductwork.”

• Heat Pump – This type of heating system works just like a refrigerator does.

Instead of cooling down the room, however, it absorbs heat from the room and moves it outdoors.

• Radiant Floor Heating – This type of heating is very similar to radiant flooring.

However, it only heats one side of the room. It is also more expensive than other forms of forced air heating.

In addition, you will notice that some forced-air heating units come equipped with a thermostat. This allows you to control the temperature in each room.

Some models even allow you to set different temperatures for every room in your home.

Other features of forced air heating include a blower motor, filters, and a condensing coil. All of these components help keep your home comfortable year-round.

What Is Forced Air Heating?

Heating systems use fans to force air through a heat exchanger or electric heater. Both types of heating systems produce heat by using a fan to move air over a heat source.

Air is forced through a heat exchanger (or electric heater) to create heat. This heat is then moved through ducts to the rooms.

How Do Gas And Electric Forced Heating Systems Function And Work?

Thermostats are like the first line of defense when it comes to heating systems.

When the thermostatic sensor detects that the room requires warmth, it signals the furnace to generate heat.

Then, an igniter activates the gas-fired burner, which heats up the gas inside the combustion chamber.

The heated air then goes through the heat exchanger and flows into the ducts.

The fan pushes this warm air throughout the house. Furnaces use electricity to produce heat. Electric furnaces have heating elements inside the cabinet.

These heating elements are made up of several coils. The more heat needed, the more coils will be turned on.

Fans blow warm air throughout the ductwork and out of the vents.

What Is The Difference Between Gas And Electric Heating Systems?

 

Electric heaters use electricity to produce heat. Gas heaters burn gas to create heat. Electric heaters blow warm air into your house, while gas heaters generate heat inside your house.

Electric heaters also require more maintenance because they need to be plugged in every day.

Gas heaters don’t need to be plugged in as often, though they still require some maintenance.

The first system generates heat using an electric current flowing through a wire. The second system uses an internal combustion engine.

Is My Forced Heating System Gas Or Electric? 

A forced-air heating system is an important part of any home. You’ll need to make sure you’re using it correctly.

You should be hearing the air circulating as it moves through the air ducts. Your forced-air heating unit is in your basement.

Gas heat exchangers use a burner to produce heat, but they’re also used for heating water. They usually have a small window located on them.

It’s possible to tell if it’s an electric heat exchanger by looking at the front panel.

Electric heaters won’t have a window, and they’ll have a metal panel that’s easy to remove.

Electric systems don’t have an access window or panel. They don’t make much noise. Electric forced-air systems use electric coils instead of burners in a combustion chamber.

They heat up the air using electric coils and have heavy gauge wiring covered in flexible metal.

Gas units have pipes made out of either black cast iron, copper, or yellow plastic hoses.

Heating systems are normally found in basements. In apartments, they’re usually in closets or on walls. Heating units are devices used to provide warmth.

Most homes use them because they are more efficient than other methods of providing heat, such as fireplaces.

There should be a window on the front of a heating unit where you can see a blue glowing flame, and you should be able to hear the sound of burning gas.

Electric furnaces run silently, but they produce heat. 

There are other ways to tell if you have an electric or a gas heating system, and some of them are more simple than you’d first think.

Gas furnaces use natural gas, while electric furnaces use electricity.

Gas and Electricity companies make sure their products are safe by putting them under pressure tests.

You should read the label on your gas bottles and check if there is a warning about explosions.

You may also want to search online for information about the safety of your gas bottle.

Gas pipes go into furnaces. Heating systems with gas lines are more expensive than those without them.

Furnaces with copper pipes cost less than those with black iron pipes. 

Get The System Inspected By A Professional

Heaters should be checked once a year, regardless of whether you use a gas or electric heater. Regular maintenance helps ensure your heater runs efficiently and effectively.

Heating units are often dangerous because they have an open flame burning inside them. When these units aren’t inspected regularly, they can cause many house fires every year.

Smoke detectors should be installed in any home, regardless of the type of heating system being used.

Carbon Monoxide detectors are important because they help prevent poisoning by gas leaks.

You should always install them in your house. When there is a gas leak, the carbon monoxide will be released into the room.

Carbon monoxide detectors will detect this and sound an alarm. This will give you enough time to get out of the room before you start feeling sick.

Electric heaters last longer but cost more money than gas heaters. Gas heaters are quieter and easier to maintain than electric heaters.

Electric heaters are less efficient than gas heaters. Heating systems should be efficient, affordable, and reliable.

You should also consider other factors such as initial costs and running costs.

Heating systems are expensive, but if you get them serviced regularly, you won’t have to pay much for repairs.

Can My Heating System Be Both Electric And Gas?

Dual fuel systems use gas and electric power to heat and cool your home.

You can save money by installing them because you won’t need as much natural gas or electricity.

Does My Gas Heating System Require Electricity?

 

Gas furnaces use gas as fuel for heating. But they also require electricity to function properly. An electric furnace requires an electrical outlet or power supply.

How Does My Electric Heating System Heat?

Electric furnaces use heating elements. Heating elements are used to produce heat inside a furnace. A heater is used to heat up a metal plate.

Heaters work by using electrical resistance. Some electric furnaces use a pilot light to start the heating process.

When a sensor detects a flame, it starts the healing process. Electric furnaces are more expensive than gas-fired ones. Gas costs less than electricity. Electric furnaces are better because they don’t require a pilot light.

Which Is More Cost-Effective?

Gas furnaces are more expensive than electric furnaces. But they tend to last longer.

Electric furnaces are more efficient than gas furnaces. So if you want to save money over time, go for an electric furnace.

Final Thoughts

If you’re looking at buying a new home, make sure that it has a good heating system. It’s one of the most important features of a home.

If you live in a cold climate, then you’ll probably need a gas heating system.

However, if you live in a warm climate, you might want to look at getting an electric heating system.

The answer depends on what kind of heating you want. We would recommend going with either electric or gas depending on where you live.

Photo of author

BY M. Kogan

Hello, I am Marcio. I am an architect and designer, alma mater is Mackenzie. Retired in theory, but an architect never retires completely. Along with architectural projects, I am a filmmaker and have completed some short documentaries. Filmmaking and design are my passions. In HomeQN I write about home decoration and foundations. The goal is to teach homeowners to DYI as much as possible, and when this is not possible, enable them through knowledge, to evaluate service quotations and choose the best service technicians.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.