dissolve hair in drain

dissolve hair in drain

Note: This post may contain affiliate links. This means that at no cost to you, we may receive a small commission for made purchases.

Is your drain clogged with hair? Here are some tips that will help you remove the blockage and get your drain flowing smoothly again!

Remove hair from your drain using a wire brush, and then pour in enough water so that it overflows the entire drain area.

Be sure to use a bowl or other container to catch water overflow. This is an effective way to dissolve the hair and prevent it from getting into the pipes.

Call in a professional plumber who can clear out the blocked drain for good if all else fails.

5 Tips To Dissolve Hair In A Drain

To dissolve clogged hair in drain pipes, try these tips below.

1.Get a plunger. A plunger is one of the most helpful home tools that anyone can quickly obtain at a reasonable price. Plungers come in different sizes and designs.

They can be used to open drains, remove clogs and dislodge hair from tub spouts. Once you know where the problem is, you can use the right tool to fix it. The best thing about plungers is that they don’t require electricity; hence, no power outage is needed when using them.

You can plunge the device into the drain without worrying about draining the water supply. Plunge cleaners work well to break up small pieces of debris in the pipe.

2. Put the plunger directly over the drain opening and firmly push down until you hear a “thunk” sound. This indicates that the problem has been solved.

Afterwards, flush the drain with a whole bucket of water to ensure that the clog has been eradicated. Repeat this procedure until you see clear water running through the sink.

3. Try pouring hot water. If you have access to a hose, heat water and spray directly onto the clog. The steam should loosen the clog up.

When you see lots of bubbles coming from the drain, take care not to let the water run too long as the hot water might burn the surrounding surfaces.

4. Use a wire brush. Wire brushes are ideal for loosening up hair and debris from the bottom of the drain. Most of these products come with handles that allow you to grip and hold the brush while pushing it down the drain hole.

Hold the brush tightly against the sides of the drain and move it back and forth. Do this slowly but steadily until you feel that the hair loosens up. Make sure you keep the bristles straight when working with wire brushes. This will help avoid scratching the sides of the drain.

5. Use baking soda. Baking soda is inexpensive and easy to find. Mix equal baking soda and white vinegar parts and pour them directly into the drain. Leave it there overnight and rinse the next day thoroughly.

Baking soda works great as it naturally breaks down grease and soap scum. Be sure to use a good quality product such as Drano or another brand recommended by a plumber.

Tips For Preventing Drain Clogging

To prevent your drain from clogging, do simple things like changing out your filters regularly, flushing all drains monthly, and taking advantage of drain cleaning services. 

How to Clean A Blocked Sewer Pipe | How to Fix a Broken Sink Drainpipe

Many homeowners may soon face a broken kitchen sink, an overflowing toilet, or even a blocked sewer line that needs unblocking.

Of course, most people would rather spend their time enjoying the company of friends and family than cleaning out pipes.

Unfortunately, plumbing emergencies often cause significant damage to homes and property.

So before any problems arise, it’s essential to plan ahead and prepare as much as possible for potential disasters.

Here are some tips on saving yourself and your home from a significant plumbing emergency.

Plumbing Basics Every Homeowner Should Know

1) Check Your Filters 

Regularly It’s essential to frequently change your household air filter.

According to the Environmental Protection Agency (EPA), dirty filters make indoor air dangerous to breathe.

In fact, a 2005 study found that “airborne household particles can contain toxins, allergens, bacteria, viruses, fungi, and other contaminants.”

A simple way to tell whether or not your filters need replacing is to pull them off of the box they came in.

Most boxes include labels that indicate which type of filter goes inside each box.

If one is omitted, buy yourself an additional box, measure the holes in the centre of both boxes, and then match them up. If they don’t align perfectly, replace the filter. 

2) Flush All Drains Monthly 

While talking about air filters, it’s also important to flush all of your drains at least once every month.

One of the easiest ways to ensure this happens is simply running cold water over the faucet until you hear it running through the pipes.

This will help remove debris and grime trapped behind walls and under sinks – helping your plumbing system work efficiently without having to be cleaned out. 

3) Change Out The Trash Compactor Filter 

On a similar note, change out the filter in your trash compactor once a year.

Not only does this help keep odours to a minimum, but it also helps protect the machine itself. 

4) Take Advantage Of Plumbing Services

You’ll have to call a professional to take care of large-scale plumbing issues.

Luckily, these professionals exist to help those caught in the middle of a disaster.

To prevent loose hair from clogging your drain, you must remove the source of the issue.

The most common reason for this is a buildup in hair and body oils accumulated over time.

When the blockage occurs at the end of the line, it can be challenging to get rid of.

If you have a complicated problem, try these tips below:

1. Use baking soda or vinegar as a homemade solution. Mix 1/4 cup of each into your hot water pipes. Wait ten minutes before running cold water through them again. This will help soften any challenging build-up.

2. Buy some commercial cleaning products and pour several drops down your drains. You can buy many different types available on Amazon.com. For example, if you are looking for something simple but effective, look for “kitchen sink cleaner” or “tub & tile cleaner.” These should work well enough.

3. Don’t use too much soap when washing your hands. Instead, wash them twice daily (before eating and after using the bathroom). Cleaning your hands is one of the best ways to avoid getting grease in your drains.

4. Avoid putting too much oil on your skin. Oil is often not suitable for our bodies or our drains. It has a tendency to clog lines and obstructions. Try keeping your hair short so that there is less potential for it to accumulate.

5. Take care of your hair. Don’t comb it when it is wet – this causes it to stick together and become tangled. Also, don’t put it anywhere where it could collect because this will cause more problems.

Tips For Cleaning Your Shower

To clean your shower quickly and effectively, keep a few things in mind.

Firstly, take out all the items you do not want to see while bathing.

Some examples include toothbrushes, hairspray cans, shampoo bottles, etc. Once everything is removed, wash every surface thoroughly. 

Start by scrubbing the walls and floor with a sponge and warm water.

Afterward, spray some cleaner onto the surfaces and let sit until dry. Then proceed to rinse everything out.

Finally, just leave it alone. Do not continue to scrub or wipe anything off afterward.

In addition, consider installing a powerhead shower head.

A powerhead can save you time in the long run since you no longer need to bend over to manually turn the water on and off.

Most of them come with pressure sensors that automatically adjust based on how much water you use.

They also provide a lot of options, including temperature control and pulsating.

Tips For Cleaning Your Sink

To effectively clean your sink, follow these steps: First, start by rinsing the bowl under hot water.

Next, throw away food particles and other debris. Using a soft cloth, scrub the entire surface with dishwashing liquid.

Followed by pouring some bleach into the bottom of the tub and allowing it to soak overnight.

Rinse everything out with clear water once it has dried completely.

If you would like to add extra protection to the area around your sinks, consider placing a rubber mat underneath it.

While this may seem unnecessary, having a rubberized lining prevents staining due to spills.

Make sure to only purchase ones that are specifically made for bathrooms.

Tips For Clean Your Toilet Bowls

While toilet bowls tend to be self-cleaning, they still need some maintenance from time to time.

The first step of cleaning your toilets requires removing any solid waste inside.

This includes feces, paper, and other debris. Next, scrub each part thoroughly before flushing.

Once you have finished removing all the waste, you must flush the pipes.

This is done by closing both handles and pushing down on the lever.

If the handle does not close fully, there is an obstruction somewhere along the line.

Check the main drain pipe and remove any debris that may be causing it to block up. Otherwise, consult your local plumber.

Afterward, rinse the whole thing out with clean water.

As a final step, apply some bleach to the area, wait at least half an hour, and then rinse again.

You should now be able to use those toilets without clogs or smells.

How To Remove Mold From Bathroom Floor Tile

You can easily remove mold from bathroom tile using vinegar.

Vinegar is effective because it reacts with mildew spores, destroying their structure.

Once the moldy spots have been treated, you should neutralize the remaining odor by sprinkling baking soda on top of them.

Baking soda absorbs odors and balances pH levels.

The next time you notice stains on tiles, try covering them with vinegar.

Let them sit for about 10 minutes, and then blot the excess moisture away with a towel.

When removing stains, avoid using harsh chemicals as they might damage the surrounding materials.

Conclusion

To conclude, I hope that my readers learned something about the importance of keeping drains clear and free from blockages.

When they get clogged due to hair and debris buildup, it could result in severe medical conditions down the road.

However, by doing things such as changing out your filters and using drain cleaners, you can avoid a very unpleasant situation altogether.

Photo of author

BY M. Kogan

Hello, I am Marcio. I am an architect and designer, alma mater is Mackenzie. Retired in theory, but an architect never retires completely. Along with architectural projects, I am a filmmaker and have completed some short documentaries. Filmmaking and design are my passions. In HomeQN I write about home decoration and foundations. The goal is to teach homeowners to DYI as much as possible, and when this is not possible, enable them through knowledge, to evaluate service quotations and choose the best service technicians.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.